Home  ›  Google Map Draw Site Plan

Google Map Draw Site Plan

Written By domingo, 8 de mayo de 2022 Add Comment Edit

Part Ii. Revit

Chapter nine. Create a site

Upon completing this session, students will be able to:

  • (CO 1) Understand the site programme and information
  • (CO 2) Set the projection location and sympathize edifice base of operations point
  • (CO iii) Import google maps and ascertain true due north & project n
  • (CO iv) Find GIS data
  • (CO v) Add & Edit Site – Topo surface, roads, side works, property line, building pod, surrounding buildings, and trees

 Session Highlights

At the stop of the session, students can create the graphics beneath.

It shows the Session highlight presenting the Eames house site plan and the 3D modeling. This is the expected result at the end of this lecture.

 Lecture Contents

(CO ane) Empathise the site programme and information

The site programme is an architectural program of proposed improvements to a given lot. A site program usually shows a building footprint, travel ways, parking, and landscaping and garden elements (Department of Building and Development Land Development, 2009).
It shows a site Plan example by Lochaber Centre Site Plan.
epitome credit: Archibald & Fraser Architects Ltd. – Wikimedia Commons – File: Lochaber Centre Site Plan.jpg

A site plan is a "prepare of structure drawings that a building or contractor uses to make improvements to the holding. Counties can utilise the site plan to verify that development codes are beingness met and equally a historical resource. Site plans are oft prepared by a design consultant who must be either a licensed engineer, builder, landscape architect, or land surveyor" (Chesterfield County, 2009).

A site programme is a elevation view of a property that is drawn to scale. A site programme can prove

  • Property lines
  • Outline of existing and proposed building and structures
  • Parking lots, indicating parking spaces
  • Driveways
  • Surrounding streets
  • Landscaping areas
  • Terrains

(CO ii) Ready the project location and understand building base of operations betoken

Describe the building footprint for the site program

It shows where to draw the building footprint and the building elevation symbols.

  • [STEP 1] Acknowledge the overall size of the building.
    • The size of the firm part of the Eames House projection is 58'-vii" x 20'-4."
  • [STEP 2] Select [WALL] from [ARCHITECTURE] tab, under [Build] console
    Or, Type [WA] on your keyboard
    • Depict just overall outside walls on level i
    • Make sure your walls are [Projection North] on the [Properties] palette.
    • Ostend the wall is – Basic Wall/Generic-8", Unconnected Pinnacle twenty' 0."
  • [STEP 3] Draw the edifice footprint
    • Click a cartoon area
    • Move the mouse to the right-side
    • Enter 58'seven" on your keyboard > printing [ENTER] key
    • Motility your mouse to the downwardly-side
    • Enter twenty'4" on your keyboard > press [ENTER] primal
    • Move your mouse to the left-side
    • Click the tertiary betoken and forth to create the building
  • [Pace 4] Move the elevation symbols closer to the close the building
    • Select i elevation symbol
    • Type [MV]
    • And click i point and movement the mouse and click the target point to complete the control.
    • Echo this process to other pinnacle symbols

Prepare the projection location

This setting is for sun orientation and conditions information
It shows the project location, and how to set the site.

  • [Stride i] Select [LOCATION] from [MANAGE] tab, under [PROJECT LOCATION]
  • [STEP 2] Enter the project address (Eames House address is 203 N. Chautauqua Blvd. Pacific Palisades, CA) and Select [SEARCH]
  • [Footstep 3] Select a Weather Station near the projection location
  • [Footstep iv] Click [OK[ to consummate the command

(CO three) Import google maps and define true northward & project n

Save site information from Google Map

  • [STEP 4] Salve the snipped image file in JPG file format in your project folder

Insert site information from google map

  • [Footstep i] Open [SITE] plan by double-clicking from the [Projection BROWSER]
  • [STEP 2] Move the project origin to the building lesser left corner
  • [STEP iii] Modify the orientation to [Truthful N]
    It indicates how to move the site plan to the project base/origin.
  • [STEP 4] Select [IMPORT IMAGE], from [INSERT] tab
  • [Footstep 5] Open the projection folder and select the google map and click [Open up]
  • [STEP 6] Click on the center of the cartoon area
  • [STEP 7] Repeat this process for the satellite map
    It shows the screen shot that the google map image was added.

Adjust the scale of the imported google map

  • [Pace i] Select the two imported maps by crossing option
  • [STEP 2] Click [Calibration] from [Alter/RASTER IMAGE] tab, under [MODIFY] panel
    or, Type [RE] for adjusting the calibration
  • [STEP 3] Zoom-in to find the graphic scale on the bottom correct side of the map
  • [Stride four] Click 0ft – click 50 ft – type fifty' – Enter
  • [STEP 5] Move the imported raster maps to be centered
    It indicates how to relocate the imported map

Adjust the orientation of the imported google maps according to the building footprint

  • [STEP 1] Select the imported google maps
  • [Footstep two] Select [ROTATE] from [MODIFY] tab, nether [MODIFY] panel
    Or, Type [RO] on your keyboard
  • [STEP 3] Select [Place]
  • [STEP 4] Click the base point to rotate, click an appropriate bespeak to rotate.
    Think how many degrees you lot rotated (for Eames House, 75.56 clockwise)
    It indicates how to rotate the google maps to match the building footprint.
  • [Step 5] Relocate the imported google maps, if needed
  • [Footstep 6] Select only the satellite map > click [Ship TO BACK] from [Modify/RASTER Epitome] under [ARRANGE] panel
  • [Step 7] Select the project base of operations origin
  • [STEP 8] Click [Angle TO True NORTH]
  • [STEP 9] Blazon [-75.56], and press [ENTER] central (for Eames Business firm, nosotros rotated the google images to 75.56 clockwise, and then you need to re-rotate the origin to 75.56 counter-clock-wise)
    It shows how to change the setting for Angle to True North
  • [STEP ten] Change the view to [PROJECT Northward] from the [PROPORTIES] to check the plan rotated the right-way.
    It shows the setting for the project north of the Site plan.
  • [Pace 11] Alter the view to [Truthful N] from the [PROPORTIES] for the site plan
    It shows the setting for the true north of the Site plan.

Crop the view to just the site plan area

  • [Pace 1] Select [CROP VIEW] and [CROP REGION VISIBLE] from the [PROPERTIES] panel
  • [Pace 2] Adjust the region for the view
    It indicates how to crop the view.

(CO 4) Detect GIS data

In this tutorial, we will find GIS information from CADMAPPER

  • [Step 1] Open up your web browser, get to https://cadmapper.com/
  • [STEP ii] Sign upwards for gratis if you don't have an account. Sign on the website.
  • [Step 3] Enter the project address [203 North. Chautauqua Blvd. Pacific Palisades, CA] and search
  • [Step iv] Adjust the area for your project by zooming in and changing the selected area. It is complimentary up to one km2
  • [Step 5] Click [CREATE FILE] to generate the 3D model
    It shows the CAD mapper website.
    image credit: Screen captured from world wide web.cadmapper.com
  • [Step half dozen] You lot can see the preview for your confirmation. Click [DOWNLOAD]
    It shows the CAD mapper website for the Eames house project.
    image credit: Screen captured from www.cadmapper.com
  • [Footstep 7] Once the download is done, open the folder to extract the zip file
    It shows the CAD mapper website for the Eames house project and how to open the downloaded folder.
    image credit: Screen captured from www.cadmapper.com
  • [Footstep viii] Extract the zip file
    It shows how to extract the downloaded file.
  • [Footstep 9] Re-create the files to your project binder and read the License.txt file before you apply the file
    It shows the license information to use of CAD mapper modeling.
  • [STEP 10] Open up the LEVEL ane view
  • [Stride eleven] Click [IMPORT CAD], from [INSERT] tab, under [IMPORT] panel
  • [STEP 12] Open the project folder, change the file type to [DXF files], modify colors to [Blackness and White], change Import units to [meter], Click [OPEN]
    It indicates how to import SITE information to the project.
  • [Stride 13] Move the imported CAD site information to the site. To move the map, yous accept to unpin before you move the site.
  • [STEP xiv] Switch the view to [SITE] view, Uncheck [CROP VIEW] from [Backdrop]
  • [STEP 15] Rotate the imported CAD site map to match the imported GOOGLE MAP (75.56 degrees clockwise)
  • [STEP 16] Move the imported CAD site map to lucifer the imported GOOGLE MAP.
    • To move correctly, you tin can switch the graphic brandish choice to [WIREFRAME]
    • Refer to other building locations and route locations to get the correct location aligned
      It indicates how to move the imported CAD to match google image.
  • [STEP 17] Open [WEST] view
  • [Footstep 18] Move the imported CAD site map to match the edifice level 1
    • Y'all tin type the Base Commencement or manually movement to friction match
      It indicates how to move the imported CAD to match building level

(CO 5) Add & Edit Site – Topo surface, roads, side works, property line, building pod, surrounding buildings, and trees

Create a TOPO SURFACE

Note, Edifice sight might be completely flat or with little level change. Please endeavor the TOPO SURFACE tool to brand the site model.

  • [STEP i] Select [TOPOSURFACE], from [MASSING & SITE] under [MODEL SITE]
  • [STEP ii] Select [CREATE FROM IMPORT], from [MODIFY/EDIT SURFACE] nether [TOOLS]
  • [Footstep 3] Select [SELECT IMPORT INSTANCE]
  • [Pace 4] Select the imported CAD site map
  • [STEP 5] Only check [COUNTOURS] from the Add POINTS FROM SELECTED LAYERS] window
    It shows the setting for the toposurface.
  • [Footstep 6] Accommodate signal locations if needed
    It shows the Toposurface and how to adjust points.
  • [Step 7] Click the green check to complete the topo surface tool

Edit TOPO SURFACE

  • [STEP 1] If you want to edit the topo surface, select the topography and select [EDIT SURFACE]
  • [Pace 2] If you want to add the point, apply [PLACE Point]
  • [Footstep 3] If you want to remove the point, select the betoken and press the [DELETE] central

Topography line setting

  • [STEP 1] Select [SITE SETTING] from [MASSING & SITE] tab, under [MODEL SITE].
    • It is a small-scale arrow on the panel
      It indicates how to open the site setting.
  • [Stride 2] Prepare your topo lines
    The increment number depends on your site map scale and how much detail yous desire to limited
    It shows the site setting for this project.
  • [STEP 3] Select [EDIT] for [VISIBILITY/GRAPHICS OVERRIDE]
    Find [TOPOGRAPHY]
    Principal CONTOURS – SOLID / SECONDARY CONTOURS – Dash
    It indicates how to change site lines with the visibility setting.

Clean up the imported CAD map

  • [STEP 1] Select the imported CAD map
  • [STEP 2] Click [DELETE LAYERS] from [MODIFY], under [IMPORT INSTANCE]
  • [Step 3] Check all except [BUILDING]
    It indicates how to remove the unused elements from the imported CAD map.
  • [STEP iv] Click [OK] to finish the command
  • [STEP 5] Check [CROP VIEW] to run into just the region within
    It shows the final site plan.

Confirm your topo in 3D

Revit is BIM software. Your 2D drawings can show in 3D. It is wise to double-check in 3D view while you lot build your model

  • [Footstep one] To create a 3D view, click the 3D view on the top of the program
    It indicates how to open an ISO view.
  • [STEP 2] Once you click the 3D view, the 3D view volition automatically open. To refer dorsum to this view, you lot tin open the 3D view on Project Browser by double-clicking. If you lot want to proceed the view, y'all must rename the 3D view. For example, ISO-view-01
    It shows the ISO view and how to change the name of the view to save it.
  • [Step 3] Click [SHADED] to see the color
    It indicates how to update the graphic style for the ISO view.
  • [STEP 4] Check [Section box] on the Backdrop and adjust the Section box by adjusting the blue pointer
    It indicates how to crop the ISO view with the section box.
  • [Footstep 5] Click [Sun path On]
  • [Stride 6] Click Shadow
  • [STEP seven] At present you lot tin can simulate the sun path past drag and dropping the sunday
    It indicates how to simulate the sun path.

Create Edifice Pod & Property line

For the building pod and holding line, you should hide the Topo image by clicking the image, and mouse right-click and select [Hide in view] > [Elements]

  • [Step 01] Go to Site & massing tab – Click [Building Pad]
  • [STEP 02] Make sure your building pod is on level 1
  • [STEP 03] Draw a closed line
  • [Stride 04] Go to Site & massing tab – Click [Property Line] – Create by sketching
  • [STEP 05] Utilize Google Map to draw the property line. Depict a closed line
    It indicates how to add Property lines.

Create Roads

  • Go to Site & massing tab – Click Subregion
  • Draw a closed line
    It indicates how to add roads to the site map.

Create Neighborhoods (Trees)

  • Get to Site & massing tab – Click Site component
    It indicates how to add trees.

Once yous finished your site plan, you should hide the Google image.

Salvage the file earlier closing the application.

Save in a different location for the backup (e.g., a cloud binder)

References

Archibald & Fraser Architects Ltd. (2012, Nov 10). Lochaber Centre Site Programme.jpg. Retrieved Oct 22, 2020, from https://eatables.wikimedia.org/wiki/File:Lochaber_Centre_Site_Plan.jpg

Site Planning Process Chesterfield County, Virginia Planning Department. Accessed xi Feb 2009. Archived March 29, 2009, at the Wayback Automobile

Google. (n.d.). Google map. Retrieved October 23, 2020, from https://www.google.com/maps

Worldwide map files for any design program. (n.d.). Retrieved October 23, 2020, from https://cadmapper.com/

mcknightsucan1991.blogspot.com

Source: https://iastate.pressbooks.pub/visualgraphiccomm/chapter/chapter-9-create-a-site/

0 Response to "Google Map Draw Site Plan"

Publicar un comentario

Suscribirse a: Enviar comentarios (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel